4″–12″ Heavy Duty Gate T Hinges

Fast shipment - worked perfectly

Easy to install and reliable. Very old-school which means they work.

We bought these for installing our gate, and they are good and sturdy. I would not hesitate to use them on my gate..... As long as you're not building a gate, that's too wide, which is what we did so there is a little siding in the middle but I know it's not the fault of the hinge. These are super strong and heavy

The hinges are good, but the screws they come with are ridiculously undersized.
These hinges need 3/8 x 3" lag bolts

The hinges are heavy enough and work well for what they are intended for. Hopefully the finish holds up over time

The hinges themselves get a 4, but the screws bring the package down to a 2. There should be at least 2 LAG screw options, with a 12 inch hinge. They should be 5/16 drive minimum and 1 3/4 long minimum. These are useless other than fo piloting holes for real lags, but even then strip to easily; because, again cheap screws. Great hinges though.

Ordered 6 of these, all had a manufacturing defect that prevented them from rotating 270 degrees, as advertised. This mean you CANNOT use them in a 90 degree (hidden flange) configuration. 1 of the six had a pin binding issue that prevented free movement of the hinge. 1 of the six had serious cosmetic flaws that rendered it unusable.

Well, I was making beefy bear shutters for my cabin. I wanted to use 2"x redwood instead of the common 1"x . I didn't know exactly what or how, but I knew there would be some weight: each of the four shutter is a 4' tall and 3' wide bifold. I anchored these with 3 1/2" Structural Wood Screws (Simpson StrongTie, Outdoor Accents). I didn't fill every hole. Man, these things are solid and smooth. I am surprised and thrilled. (I'm also surprised my shutters actually came out nice!) I found nothing like this in three hardware stores.

We just installed three of these on a very heavy shed door yesterday, and were a bit apprehensive about the 80 pound per hinge weight limit. Thus, we tossed the screws that came with them (way too short for our project) and used 3.5" long 5/16" bolts, washers and nuts. They were easy to install and are working the door flawlessly. No sag, breakage or movement once installed. Installed them on the door first, then on the door frame. The price was good, and we will update this review in the future if necessary.

Great quality would definitely purchase again