4″–12″ Heavy Duty Gate T Hinges

Good and strong

I find these hinges to be quite durable. Far better than what the fencers had originally put in.
My only problem is that the screws provided were using Philip's (cross), instead of Robertson's (square) or Torx (star). This makes then very difficult to use and easily stripped using an impact driver even with a pilot hole. I ended up using long GRK fasteners on the posts instead.

The hinge holds up a 6' wide wood fence gate well. The screws provided is a bit weak and short so 3 of the hinge's rectangular plate holes ends up being attached to the fence post using 3.5" screws. So far all feels solid.

Great product

Haven’t installed them yet but they seem quite hefty. My doors are pretty heavy so I bought longer screws for them but I think with they longer screws the hinges will be tough enough to hold them.

Good hinges, Although the pin was a bit sloppy for my liking. Either pin was too small, or barrel should have been a bit smaller.

Could not get the set I received to go to a 90 degree angle.

Large, good paint, will carry a heavy gate. But typically you see spacers between where the 2 parts of hinge will touch, these don't have it, so it squeeks like crazy and will wear faster. Also the pin in the hinge is too small and has a ton of play, also causing additional wear, and a noisy hinge. Lastly the screws are useless as others mentioned, and I didn't need hardware, I'm fine buying my own. But if you're going to sell it with included hardware as a perk, it should work.

I bought this because I have a larger gate and I wanted to be sure there was no sag. It doesn’t sag a lot but it is enough that the top corner of my gate is rubbing. Looks like I’m going to Home Depot to buy a replacement

Nice quality small hinges.