4″–12″ Heavy Duty Gate T Hinges

I like the quality of the black painted, powder coat finish.

I don't regret my purchase of these hinges, but they don't have bearings, they are not rustproof and definitely not powder coated. I assumed this would be the case at this price point.
They are painted black, but they are prone to chipping.
Take care in hanging them and they will perform just fine.

Typically a hinge is relatively tight fitting and operates smoothly. These have a lot of play in them because the pin is too small for the knuckles, thus the leaves are loose with too much movement.
Great paint job though.

Extremely loose hinges, wouldn’t recommend

I would not say these qualify as heavy DUTY I didn’t use them and waited to long to return. But suppler was prompt and shipment was complete.

As long as you don't expect much for the money these are a good buy. At less than half the cost of home improvement store for an 8" hinge these are exactly that. They are not a heavy duty more a standard duty hinge. I'll be using three of them on each of a pair of 55 x 60 gates associated to a 10ft RV pad entrance. These do not have plastic bushings at the pivot point so they will squeak and will require lubrication. The included fasteners are inadequate, but I'll use them for another purpose. The hinge mounting through holes will accommodate 1/4" lags. Three of the six needed some straightening using a vise because they would not sit flat. The gates are currently mounted with two 4" hinges and sagging. I do not have a picture of this project because I am still assembling the new 2x4 gate frames. I am of the perception most know what hinges look like when mounted.

Perfect

Awesome Amazonian!!!

Work as expected with no issues.
Currently using two sets of three hinges to hold up two separate 4ft x 6fts gate in a 6ft privacy fence.
No bend or sag. I am happy that these hinges will continue to work for many years.

what can you say about hinges, they work