3.5" Heavy Duty Square-Plate T Hinges

Hinges is holding up so far after 6 months in Pac NW weather. Original screws were trash (weak, short, stripped easily, and clean finish, corrosion-resistant within a week). I'd suggest using your own screws.

Perfect just as expected suits the project needed for would purchase again. Quiet and smooth.

These are Heavy Duty Brackets but the supplied 1/2 inch long screws are useless. The bracket is 1/8 inch thick and the lead point of the screw is just less than 1/8 inch. This leaves roughly 1/4 inch of gripping engagement to the attachment material. Taking into consideration the spiral of this screw size and the 1/4 inch, these cannot work. You need 1 inch long screw at the minimum. I would recommend 1 1/2 inch min. I used 2 1/2 inch long through 1/2 t-11 with a 2x4 backing frame. The shed wall and frame was the same. These brackets are solid. Quiet and smooth.

Used on a large wooden outside door, holding up like a charm. Quiet and smooth.

Strong has held up last summer and all winter Quiet and smooth.

They work for light duty projects. The screws are trash, are thin and brittle, and I highly recommend NOT using this for anything that supports even moderate weight. Quiet and smooth.

Worked perfectly. Quiet and smooth.

EXCELLENT Quiet and smooth.

They are heavy duty hinges, but came with short screws, at most 3/4". I had my own longer screws, so I was able to use them. They should have come longer & thicker screws for a heavy duty hinge. If you order them, make sure you have some screws laying around to use to install them. Quiet and smooth.

Exactly as described. Very sturdy. So far, no issue. Quiet and smooth.