4″–12″ Heavy Duty Gate T Hinges

If you're building heavy shed doors, like me (3/4" plywood, framed with 2x4s), you'll want hinges that can be anchored into the studs, not just into the framing. Depending on your framing, and how much shimming you need to plumb the rough opening, the hinges might need to be anchored a good 2" from the inner edge of the door in order to reach the studs. Most shed hinges are too small to reach that far, but these solved the problem. The hinges can be anchored into the studs, leaving the first screw hole of the door side of the hinge unusable (see the picture), but the remaining four screw holes are quite enough to support even a heavy door. The hinges look good and work well.
The included screws were pretty flimsy, but you should always select screws for your specific application anyway. Deck screws fit perfectly in these holes; I used 3" deck screws on the anchor side and 2" deck screws on the door.

Absolutely junk, do not buy! They gave small light duty screws for heavy duty hinges that are not heavy duty hinges I don't suspect that these hinges will last very long. False advertising at its finest

Great value. Actually metal as well. Would recommend

I bought these a year ago and put them on the shelf because I wasn’t ready to use them yet. I guess I should have opened them up sooner because the quality was absolute garbage. The powder coat is chipped on almost all six hinges. Two of them had pins bent enough that the hinge binds when used. Over all not impressed.

Worse than I expected for a simple metal hinge. Two of the six have weird flaws in the metal. Probably useable, but ugly up close. Also needed to replace tiny included screws for a door with some weight. Would not buy again.

not as heavyduty as you might think. metal thickness.pin size, everything has a place when you call an item heavyduty. these are like mediem duty in my opinion. still agood deal. needed to use three on a door to achieve some sturdiness.

These hinges worked as described. They were easy to install but I did used a bigger screw than was was provided. Pleased with them so far.

Excellent quality T-hinge but the installation screws provided were too short for my application. These hinges were purchased as part of a client's shed door refabrication project and worked extremely well. The new shed door was constructed of treated lumber, and due to the moisture content of the wood, the weight was more than expected. The screws provided by the manufacturer were discarded, and the hinges were installed using 2½ inch Deckmate Star drive Coated Screws (see pic). When operated, the doors easily opened and closed without sagging. Although the screws were too short for my application, I would rate this product 5-star. They are well made, easily installed, and I highly recommend them!

Heavy duty and great price. Happy with my purchase.

Would not consider these heavy duty, however my doors weigh 80lbs each and these work well