4″–12″ Heavy Duty Gate T Hinges

Price was right. The large hinges were perfect size for my barn style door. My door was heavier than average in that 2x4's sandwich 1/2 sheathing to create the door. The hinges were plenty strong enough to get the job done with the heavy door. At first I was a little concerned because the hinges were made of metal that were a litle thinner than I wanted. However, it turned out to be plenty strong. It has nice powder coated paint, looks attractive and I expect it to be a durable finish.

The way I built the door is that I actually added the 2x4 stiffeners into the wall as I was building the wall. Added more 2x4s to hold the door in place. Then I cut out the door from the wall. While the door was being held in place by the temporary 2x4s, I attached the hinges in place, then, removed the temporary 2x4s and the door did not sag but maybe 1/8 of an inch at most.

I purchased these well in advance of my fence/gate project, so I missed my return window or I would return these.
As I was ready to mount these "Heavy Duty" hinges, I noticed the tang (long strap) wobbled a bit too much. If you hold the hinge, and the end of the strap/tang, you can move the strap up and down, there is nearly 1/2 inch of up/down room. This will end up being several inches of sag when you go out 4, 5 or 6 feet. So I though I would pull down the wobble as I mounted them to several test pieces of 2/4's, and the wobble, or rather sag, well it just got worse. There didn't seem to be any end to the sag possible to the point where the hinge would bend.

I have no idea how anyone could use these except for very light, and/or decorative uses. I could care less how thick the metal is (as some have mentioned,) or how short the screws are as others have mentioned, I just want it to work. Again, I have no idea how these hinges could support anything of any weight or span.

I tested the 40 year old hinges I pulled off my old gate, and these worn out rusted hinges still had almost no wobble or sag, even with the rusted hinge pin.

I purchased these for a door on an outdoor shed. They are flimsy and poorly designed; the hinge hardware section that attaches to the jam is undersized and the provided fastening screws are humorously inadequate. These might be better suited for a cabinet door or an interior pantry door.

the hinges are thin and have a lot of play in them. they are probably fine for a garden gate but not much more. also, the description was a bit misleading....they gave the impression that each hinge could hold 110 pounds, but further down the page they state the the 110 pound rating is based on 3 hinges....either way, there is so much slop in the hinge it would be very difficult to hang a door without it sagging. would not buy again....would not recommend

Great product. Worked great for what I needed.

work good

These were very well made, heavy duty outdoor hinges. Powder coating was perfect. Looks like they will outlast the shed.

The screws provided were #6 X 1/2". Cheap, light duty and completely not usable on a product that will have real-world use. Why did they even bother to include these screws???

Synopsis: Great hinge, junk screws. But...............I bought these for the hinges so I guess its 5 star

The hinges are ok I guess, I just installed them. The screws are way to support the weight of a wooden gate. These screws need to be at least double the length, and double the diameter. I had to go to Home Depot to get new screws. After adding the prices of the new screws, at the end is better to buy the hinges at HD or Lowe's.

OK

Descent price and sturdy product.