Your cart is empty
You may check out all the available products and buy some in the shop
Return to shop
3.5" Door Hinges, 1/4" Radius
in stock
Price range: $4.99 through $45.9931% OFF
Description
Description
Specifications
- Standard 3.5″ Interior Hinge — 3.5″ x 3.5″ hinges with 1/4″ radius corners and 6-hole pattern, sized for most residential interior doors.
- Solid Iron Construction — Thick, flat-iron leaves provide reliable strength, stability and long-term durability.
- Smooth & Quiet Operation — Plain-bearing knuckles and precise alignment help reduce wobble and squeaks for a comfortable door swing.
- Premium Finish Options — Matte Black, Brushed Nickel, Satin Brass and other finishes to match TDCHINGES / TDC door levers, knobs and locks.
- Upgraded Screws Included — Matching wood screws plus extra-long screws (up to approx. 2-1/5″) help secure hinges firmly, especially when reusing existing holes.
- Versatile Applications — Ideal for bedroom, bathroom, hallway and closet doors; also suitable for cabinets, utility rooms and light outdoor buildings when appropriate.
Key Specifications
| Hinge Size | 3.5″ x 3.5″ (89mm x 89mm) |
| Corner Radius | 1/4″ radius (R1/4) |
| Mount Type | Full mortise; standard residential door prep |
| Holes per Leaf | 6-hole configuration |
| Material | Solid iron / steel |
| Bearing & Pin | Plain bearing; riveted removable pin (pin can be driven out from bottom as shown in product images) |
| Available Finishes | Matte Black, Brushed Nickel, Satin Brass, other coordinated finishes (varies by product option) |
| Pack Options | Multi-pack configurations (e.g. 1 Pack, 3 Pack, 24 Pack, 30 Pack, 42 Pack, etc.); see pack selector on this page. |
| Included Screws | Color-matched mounting screws for each hinge; includes upgraded standard-length screws and extra-long screws for enhanced holding power. |
| Recommended Hinges per Door | Typically 3 hinges per standard interior or exterior door (check local code / door weight). |
| Certifications* | Selected models tested to ANSI/BHMA standards for durability and finish (see specific product details if applicable). |
| Use Cases | Interior doors, office doors, bedrooms, bathrooms, closets; suitable for residential and light commercial projects. |
| Installation | Fits doors and frames prepped for 3.5″ hinges with 1/4″ radius. Align hinge with mortise, fasten screws; use extra-long screws on jamb side when replacing old hardware. |
What’s Included
- 3.5″ x 3.5″ 1/4″ radius door hinges in selected finish and pack size.
- Matching wood screws set (standard + extra-long), quantity matched to hinges.
Cautions
- Confirm hinge size, corner radius and hole pattern match your existing door prep before installation.
- Use appropriate tools and follow installation diagrams; improper installation may affect door alignment or load capacity.
- For heavy or exterior doors, verify hinge rating and quantity meet project requirements.
Reviews (1139)
Only logged in customers who have purchased this product may leave a review.
Related products
-
-50% -
-20%4″ Stainless Steel Ball Bearing Door Hinges + Knob Lock
Price range: $39.99 through $269.99 Quick Shop -
-7%3″x4″ Stainless Steel Ball Bearing Door Hinges + Lever lock
Price range: $66.99 through $449.99 Quick Shop -
-21% -
-26%
They fit the standard pocket in the doors and door jambs, the included screws, in my case, are longer than what was installed, which is great as there's a bit more for the included screws to bite in with. Each screw bag has enough screws for 6 hinges plus another 6 longer screws of needed.
A couple of spots, seems previous homeowner opted to use 3-4" screws and or stripped out some of the holes, and I ended up doing the toothpick+woodglue trick and got it.
These don't seem to fit any different in the pocket than the previous hinges, but I think they do sit a bit different in terms of the edge to center of the hinge, IE, I think the hinge itself sticks out a bit further; I notice this when swapping, as I'm doing the middle hinge and have to massage things in place to screw it in, then when I get the top/bottom done, all is right. These feel like they are a decent thickness, but I may end up bending one to give a bit more gap as the house isn't square (what house is?!)